手动工具 Manual Tool
• STK provides the whole manual tools which is applied for high pressure.It can be manually complete the inner hole、chamfering cylindrical、teeth、steel tubing thread.
STK提供完整的用于超威尼斯人应用的手动工具，能够手动地完成内孔倒角、外圆倒角、app扳牙等。
• Size range can be machined in the 1/8”~9/16”,convenient installation , test and repair.
尺寸范围在1/8"~9/16"都能够加工，方便现场安装，调试，维修。
• The STK tool is the only ultra pressure tool manufacturer in China,our products can replace foreign products perfectly.
STK是中国高品质超威尼斯人工具的生产商，其产品完美地替代了进口产品。
手动工具 Manual Tool
• Coning Tool can process tubing taper,angle is about 57°~59°.
倒外圆锥工具可以加工app的锥度，角度约57°~59°。
• Chuck and bit tool can be replaced,the same tools can be processed tubing of 1/4 "O.D、3/8 " O.D、9/16" O.D.
夹头，刀具可以更换，同一个工具可以加工 1/4" O.D、 3/8"O.D、9/16"O.Dapp。
• Adjusting gland nut,can adjust the depth of processing.
调节压紧螺母，可以调节加工的深度。
技术参数 Tecnnical Parameter
型号
Part No.
app尺寸
For Tubing Size
CT2
1/8"O.D
CTA
1/4"O.D
3/8"O.D
9/16"O.D
手动工具操作指南 Manual Tool Operation Guideline
倒外圆锥操作说明 Inverted conical operation instruction
• Clamping fixed block of coning tool.
把倒外圆锥工具上固定块固定。
• Adjust the slot width is slightly larger than the length of the cutting cone , loosen the gland nut , put the tube into the collets inside ,l ock gland nut.
调整退刀槽的宽度稍大于切削锥面长度，松开螺母，把app插入夹头里面，锁紧螺母。
• In the observation hole drops into the cutting oil , so that the cutting edges maintain lubricating.
在观察孔上滴进切削油，使切削刃上保持润滑。
• Right hand turn the handle,at the same time left hand rotation screw gland nut(clockwise) , at the beginning of the handle feels heavier , when the rotary gland is screwed almost to the end , speed up the rotation speed of the handle , When handle feels relaxed , show that complete the cutting , loosen the gland , pull out the tube and check the cone if is suitable , if not , continue above operation.
右手转动手柄同时左手也旋转旋紧螺母(顺时针)，初期手感较重，当旋紧螺母接近到底时，加快手柄旋转速度;当手感轻松，表明切削完成，把螺母松开，抽出app观察锥面是否合适，如不够继续上述操作
手动工具操作示意图
